Please choose Estimate Rinnai Motor Freight for this item.
Unlike ordinary single-stage (on/off, hot/cold) gas appliances
the Rinnai Energy Saver has the ability to modulate both
its burner and blower to provide maximum efficiency and
comfort.
The Energy Saver furnace incorporates an electronically
driven seven-stage gas control system to help maintain
an even and continuous heat output for very stable room
temperature control and efficiencies in both gas and electrical consumption.
The Energy Saver is attractive, quiet, compact and has a cool
to the touch cabinet. All of these features add up to make the
Energy Saver an excellent companion for you, in your home.
Exceptional Energy Efficiency
The Energy Saver extended life stainless steel heat exchanger
transfers 84% of consumed gas to useful heat.
Easy Installation-The Energy Saver Rinnai Heater comes complete with an easy to install Horizontal Direct-Vent Double-Walled Venting kit. Simply drill a 3" hole through the wall, Insert Rinnai's special direct vent Double-Walled tube and adjust it to the wall thickness & mount the outside wall cap plate to the tube. Then connect the Rinnai Heater Direct-Vent Free-Standing High Efficiency Heater.
The Rinnai Direct Vent Heater is your best selection for clean comfortable Heating. Gas Heating is much cleaner than Kerosene heating which always has a slight odor.
Warranty: 2 Years Labor ~ 5 Years Parts ~ 10 Years Heat Exchanger. Rinnai stand behind there units with a terrific warrranty and consumer Technical toll free line.
Specifications MODEL DESIGNATION ES38
HEAT INPUT (BTUs) Max. Min.
Natural Gas 38,400 10,500
Propane 36,500 10,500
MIN. CLEARANCE .
Side 2" (51mm)
Top 10" (250mm)
Front 40" (1m)
GAS INLET 1/2"
(13mm)
ELECTRICAL
SUPPLY 120 Volts
60 Cycles
2.0 Amps
Draws 121 Watts
FAN
OUTPUT Hi-360.6CFM
Lo-203.4CFM
SHIPPING
WEIGHT (Lbs.) 110 lbs.
(49.9 kg)
Intelligent 7-stage Modulating Gas Valve and Blower
• Automatically adjusts the heat output and blower control,
delivering a stable room temperature for maximum
efficiency and comfort.
• Whisper quiet 7-stage fully modulating blower, no more
going from on to off and hot and cold.
Advanced Safety Features:
• Child Safety Lock.
• Electronic Ignition—no pilot light.
• Venting Systems are wind tunnel tested.
• Clean filter indicator.
• Each heater passes a rigorous battery of tests before
it leaves Rinnai.
• On board Self-Diagnostics for easier maintenance.
The Only “Cool-to-the-Touch Cabinet” In America.
Making it safe for any room.
Up to 84% Efficient Stainless Steel Heat Exchanger
• The EnergySaver's reputation lies in its ability to extract
up to 84% AFUE efficiency through the use of a stainless
steel heat exchanger, which adds many years of comfort.
Just imagine, no heat loss from leaky ducts.
Integral Humidifier
• Adds humidity to your room for just the right
comfort level.
We also want your new Rinnai Heater to be protected from Brownouts, power surges and electrical storms so we are going to throw in a free surge protector!
Local, state, provincial and federal codes must be adhered to .
ES38 - Rinnai
ES38
With the ES38 you’ll enjoy clean, comfortable and consistent heat all winter long.
At up to 38,400 BTU’s, the ES38 is perfect for larger areas that require heat. And with no need for duct work, it offers flexible and easy installation options.
FOT-151 wall termination kit included (4 ½” - 9 ½”)
Self-diagnostics with error code indicator
Sealed combustion
“Cool to the Touch” cabinet
Child safety lock
7-Stage modulating gas valve
Whisper-quiet fan
Works with Natural Gas or Propane
10-year heat exchanger limited warranty for residential installations (5 years on parts, 2 years on labor)
Dimensions: 36 ⅝” W x 26 ⅜ ” H x 13” D Weight: 91 lbs. Approved Gas Types: Natural Gas or Propane Minimum/Maximum Gas Rate (Input BTUs) Natureal Gas: 10,500 – 38,400 NG Propane: 10,500 – 36,500 LP AFUE Rating: 80.6% NG and 82.0% LP Electrical: AC 120 Volts, 60 Hz, 121 Watts Noise Level: 37 – 47 dB Gas Connection: ½” FNPT Temperature Range (Min-Max): 60°-80° F in 2° increments
Installation Kit:Includes A 48 inch stainless steel gas flex line, 2 Dual thread Flare Adapters for 1/2 inch or 3/8 inch, one 1/2 inch gas shut off valve, pipe joint compound....$34.99. Just add to your order , select it on the option list.
We also want your new Rinnai Heater to be protected from Brownouts, power surges and electrical storms so we are going to throw in a free surge protector!
Local, state, provincial and federal codes must be adhered to.
Please check your local code authorities because restrictions on installing ventfree gas appliances may exist
Please remember to choose fuel option
(Nat Gas or LP)
We also want your new Rinnai Heater to be protected from Brownouts, power surges and electrical storms so we are going to throw in a free surge protector!
Please select Estimate Motor Freight as shipping option.
If you have ordered a product that is discontinued, we will contact you within 48 hours of a business day if we have it in stock. There are some items left over in stock, keep in mind we do not always know when an item is discontinued until someone orders the product.
